Use of heat-moisture treated maize starch to modify the properties of wheat flour and the quality of noodles

Waxy, normal and high-amylose maize starches were subjected to heat-moisture treatment (HMT) and then added to wheat flour (WF) in different ratios (1%, 5% and 10%). The properties of blends and their cooked noodles were studied to investigate the effects of HMT starches. The incorporation of HMT starch in WF led to an increase in swelling power, peak viscosity and breakdown and to a decrease in setback, thus inhibiting retrogradation, hence enhancing resultant noodle softness. Compared to the same addition ratio of native starch to WF, HMT starch led to higher tensile strength and extensibility in resultant noodles. WF with added HMT starch had higher resistant starch than with native starch. This study showed that addition of HMT maize starch has potential to bring nutritional benefits. However, it is necessary to select the proper blending ratio and amylose content of starch to add, in consideration of its effect on noodle quality.     

Unreliable numbers: error and harm induced by bad design can be reduced by better design

Number entry is a ubiquitous activity and is often performed in safety- and mission-critical procedures, such as healthcare, science, finance, aviation and in many other areas. We show that Monte Carlo methods can quickly and easily compare the reliability of different number entry systems. A surprising finding is that many common, widely used systems are defective, and induce unnecessary human error. We show that Monte Carlo methods enable designers to explore the implications of normal and unexpected operator behaviour, and to design systems to be more resilient to use error. We demonstrate novel designs with improved resilience, implying that the common problems identified and the errors they induce are avoidable.     

Effects of bioaugmentation on indigenous PCB dechlorinating activity in sediment microcosms

Bioaugmentation is an attractive mechanism for reducing recalcitrant pollutants in sediments, especially if this technology could be applied in situ. To examine the potential effectiveness of a bioaugmentation strategy for PCB contamination, PCB dehalorespiring populations were inoculated into Baltimore Harbor sediment microcosms. A culture containing the two most predominant indigenous PCB dehalorespiring microorganisms and a culture containing a strain with a rare ortho dechlorination activity and a non-indigenous strain that attacks double-flanked chlorines, were inoculated into sediment microcosms amended with 2,2′,3,5,5′,6-hexachlorobiphenyl (PCB 151) and Aroclor 1260. Although we observed a similar reduction in the concentration of PCB 151 in all microcosms at day 300, a reduced lag time for dechlorination activity was observed only in the bioaugmented microcosms and the pattern of dechlorination was altered depending on the initial combination of microorganisms added. Dechlorination of Aroclor 1260 was most extensive when dehalorespiring microorganisms were added to sediment. Overall numbers of dehalorespiring microorganisms in both bioaugmented and non-bioaugmented microcosms increased 100- and 1000-fold with PCB 151 and Aroclor 1260, respectively, and they were sustained for the full 300 days of the experiments. The ability of bioaugmentation to redirect dechlorination reactions in the sediment microcosms indicates that the inoculated PCB dehalorespiring microorganisms effectively competed with the indigenous microbial populations and cooperatively enhanced or altered the specific pathways of PCB dechlorination. These observations indicate that bioaugmentation with PCB dehalorespiring microorganisms is a potentially tractable approach for in situ treatment of PCB impacted sites.     

Arsenic-sulfides confound anion exchange resin speciation of aqueous arsenic

A field-portable anion exchange resin method (often cited as the Ficklin method (1983)) has been extensively used to distinguish between dissolved arsenite (As(III)) and arsenate (As(V)) species in natural waters. As(III) occurs largely as As(OH)(3), which is uncharged at ca. pH 7, while As(V) is negatively charged and will sorb to the resin. However, we show that negatively charged As(III)-sulfide (thioarsenite) species, important at sulfide concentrations >10 microM, also bind to the anion exchange resins, and therefore might be interpreted incorrectly as As(V). Furthermore, we show that nitrogen-purging, which results in a conversion of As(III)-sulfides to arsenite, can be used to obtain accurate arsenic speciation when resins are used on sulfidic water samples.     

Distribution of total mercury in the fishes of Lake Oahe

In 1971, a joint Federal-State survey was conducted to investigate the total mercury content of fish and sediment in Lake Oahe, South Dakota. Average total mercury concentration of 225 fish flesh samples was 0.27 mg kg⁻¹; game fish samples averaged 0.31 mg kg⁻¹ and nongame fish samples averaged 0.22 mg kg⁻¹. Frequency distributions of total mercury concentrations in the fish are presented by fish species and sampling location. Data include total mercury analyses of 43 sediment samples.     

Emission of pollutants from wood waste incineration at sawmills in Abeokuta metropolis,Nigeria

This paper reports an assessment of the effects of wood waste burning on air quality and the perceived human health in an urban setting. The concentrations of particulates and selected gases were monitored within the vicinity of sawmills in Abeokuta metropolis. The levels of CO, CO₂, SO₂, NO_x, NO₂, H₂S, CH₄ and particulates at distances from sawmill dumps were measured using portable samplers. Additionally, information on sawmill operations and health problems encountered by the exposed population were collected from a community survey. From the data analyses, between 60 and 100% of wood waste generated by sawmills were burned openly, leading to pollutants emission. The mean concentrations of PM_0.3–0.5 (32 523–40 284 μg/m³), NO₂ (1.0 ppm), SO₂ (3.3 ppm), CO (759 ppm) and CO₂ (4.9%) were higher than the permissible limits at 0–15 m from the dump sites. Almost all sampled parameters showed positive association (R = 0.90–0.98; p < 0.05) at sample sites. Moreover, distance of sites to the dumps explained 51–93% of the variation in parameters levels. Both respiratory and dermal diseases were frequently experienced by the exposed population. Strict land-use zoning, pollution abatement measures, environmental quality monitoring and waste-to-energy interventions are urgently required in the study area.     

Ausbau des Stichkanals nach Salzgitter von SKS‐km 3,550 bis 14,918

Expansion of the branch channel to Salzgitter from SKS‐km 3,550 to 14,918 The branch channel to Salzgitter will be extended to the waterway category Vb in the next years. This will enable inland waterway vessels with a width of 11,45 m and a loaded draft of 2,80 m to run it without limitations. The reaches Wedtlenstedt and Üfingen will be extended in most areas to a trapezoidal cross section with a width at water level of 36,90 m and a water depth of 4,00 m. The exit basins of the locks will be extended on one side. Overall about 1 000 000 m² of soil will be moved. About 300 000 m² of clay sealing and 460 000 m² of rip‐rap will be installed. Three culverts have to be replaced by new constructions to adapt to the new cross section of the channel. In addition two bridges will be modified to allow for a clearance of 5,25 m. At present the plan approval procedure is carried out. It is expected to achieve the plan approval order in 2017. The construction is planned to start in 2018. Completion is scheduled for 2024.     

Effect of atomic layer deposition temperature on the performance of top-down ZnO nanowire transistors

This paper studies the effect of atomic layer deposition (ALD) temperature on the performance of top-down ZnO nanowire transistors. Electrical characteristics are presented for 10-μm ZnO nanowire field-effect transistors (FETs) and for deposition temperatures in the range 120°C to 210°C. Well-behaved transistor output characteristics are obtained for all deposition temperatures. It is shown that the maximum field-effect mobility occurs for an ALD temperature of 190°C. This maximum field-effect mobility corresponds with a maximum Hall effect bulk mobility and with a ZnO film that is stoichiometric. The optimized transistors have a field-effect mobility of 10 cm²/V.s, which is approximately ten times higher than can typically be achieved in thin-film amorphous silicon transistors. Furthermore, simulations indicate that the drain current and field-effect mobility extraction are limited by the contact resistance. When the effects of contact resistance are de-embedded, a field-effect mobility of 129 cm²/V.s is obtained. This excellent result demonstrates the promise of top-down ZnO nanowire technology for a wide variety of applications such as high-performance thin-film electronics, flexible electronics, and biosensing.